XK 120 Roadster Standard Trim Kit Checklist
Carpet Set
A complete set CNC cut in Wilton wool carpet, cut and bound, with leather heel pads and leather gear stick gaiter sewn in.
Underfelt Kit
CAD cut underfelts reduce heat and road noise.
Leather Front Seat Covers
A pair in leather, carefully grain and color matched, with moquette backs, (sewn, ready to install). Please specify whether arched or straight backs and number of pleats/flutes.
Leather Center Console Cover
In leather, carefully grain and color matched, sewn, ready to install.
Center Console Base
Center console base fiberboard as original.
Leather Handbrake Gaiter
Handbrake gaiter in leather, sewn, ready to install.
Door Panels (pair)
Complete door panels in hardwood plywood, vinyl trimmed including original style pocket flaps with tenax fasteners, includes small panels under main door panels (later cars only). Please note, very early cars may have come with all leather door panels, available as upgrade.
Leather Door Pulls/Lanyards
Leather pulls with original ring end hardware sewn in.
Door Opening Re-trim Kit
As original moquette covered “J” rubber extrusions, one pair for “A” post and one pair for sills and plain moquette covers for under “B” posts.
Door Panel Pocket Liners
Riveted fiberboard inner pocket inserts (flocked beige as original).
A-Post/Kick Panels
A pair of panels, trimmed in vinyl, ready to install. 1952-1954 has cut-out for vents.
B-Post “Dog Leg” Panels
A pair of panels vinyl trimmed, ready to install.
Underdash Panel
Panel. trimmed in vinyl, ready to install (with or without cut-out for heater). Please specify.
Rear Bulkhead Cover (Lower)
Pre-cut vinyl for vertical panel and around batteries.
Rear Bulkhead Cover (Upper)
Pre-cut vinyl for vertical panel and side screen storage area.
Battery Box Cover
Pre-cut vinyl and foam ready to cover your battery box cover panel.
Dash Re-trim Kit
Pre-cut leather and piping to re-trim center panel and panels to the left and right of instrument panel.
Cockpit Coaming “D” Roll Kit
Pre-cut leather and piping, includes top rail birch plywood support strips (D-roll rubber included with major kit and is also available as an extra to the standard kit)
Panel Above Instruments
Complete panel vinyl trimmed, ready to install.
Panel Below Instruments
Complete panel inyl trimmed, ready to install.
Wheel Arch Covers
Pre-cut vinyl and foam ready to cover inner body wheel arches.
Boot Mat
Cut and bound, in wool carpet (early cars) or hardura (later cars) – please specify.
Boot Lid Panel
Panel, vinyl trimmed.
Miscellaneous Trim Covers
All the following are pre-cut for ease of installation:
• 1 pair Underdash plywood triangle covers (vinyl).
• 1 each Headlight Dip Switch Base Cover (moquette).
• 1 each Transmission Inspection Plate Cover (vinyl).
• 1 each Hand Brake Base Plate Cover (vinyl)
Black Topped Carpet/Bootmat Snap Set
22 sets (4 pieces per set).
Screws and Washers
20 short and 20 long with original cup washers, in stainless steel, made in England.Hard to find in the US.
Major Trim Kit Content Checklist
Please note our Major Kit includes ALL items listed in our Standard Kit, PLUS:
Seat Foams, Cushions and Squabs
Our seat cushion foams are moulded to the original contours in a high-quality modern latex foam. This ensures greater comfort and resistance to collapse and deterioration. Our squab foams are pre cut and fabricated in high-density polyurethane foam. Please specify arched or straight back seats.
D Roll Rubber
14 ft. extruded rubber as original.
Hood/Soft-Top
Hood/Soft Top in Sunfast cloth with cloth binding. Please confirm early short style or late long style. (Note most late style hood/soft top frames (painted grey) or early style hood/soft top frames (1949-51) are chrome-plated).
Hood/Soft Top Bow Webbing
In light tan cotton with original chevron pattern.
As the option was offered by Jaguar, custom color combinations (two-tone seat flutes/pleats) and contrasting piping are also available at no extra charge.
Our Guarantee
We urge you to carefully compare the quality and originality of our sample materials with others.
Carefully compare the content of our Interior Trim Kit with others, whether a full panel or just covering material is supplied. Check for extras; door pocket liners, moulded latex foam cushions, and D roll rubber, miscellaneous pre cut trim covers and snap set, hood/top bow webbing and panel fixing screws and washers
We also offer full trim installation services (send us your seats for re-trimming at fixed prices and guaranteed results, or we offer free technical/installation advice to you or your shop. Remember: don’t just shop price, look at value for your money, keeping in mind all BAS Ltd. kits and products come with a no-nonsense guarantee on fit and originality to concours standards.
You get what you pay for with most things in life and Jaguar interiors are no exception. “Do it once, do it Right”. Compare samples, compare content of kits, ask the right questions. Don’t blow your careful restoration or devalue your car with a poor quality non original interior. The choice is yours.
BAS Quality Check List:
✓ Quality Materials
✓ Quality Workmanship
✓ Quality Service
GUARANTEED.
Also ask us about our XK120 Roadster Rubber Seal Kit, Tailor Made Dust Covers, Chromes and Finishing Hardware.